Pocono Fabricators

Developer, Manufacturer and Supplier of Pre-Krete Products

Menu
  • About
  • Products
  • Markets Served
    • Power Generation
    • Pulp & Paper
    • Abrasion Service
    • Refineries
    • Potable Water
    • Mining, Geo Thermal, Pipe Lining
    • Fire Training Facilities
    • Close
  • Information Center
    • Technical Data Sheets
    • Safety Data Sheets
    • Application Guides/Specifications
    • Design Parameters
    • • Compressive Strength
    • • Flexural Strength
    • • Maximum Service Temperature
    • • Pre-Krete Curing Methods
    • • Coefficient of Thermal Expansion
    • • Tensile Strength
    • • Corrosion Resistance
    • • Thermal Stress Index
    • • Thermocycling/Thermal Shock
    • • K-Factor or Thermal Conductivity
    • • Density
    • • Pure Aggregate
    • • Abrasion Resistance
    • • Absorption Factor – Barrier Linings
    • • Cracking and Self-Healing Properties
    • Close
  • Contact

Concrete Sealer

Concrete Sealer is a resin-based curing compound designed to retain an optimum amount of moisture in freshly placed Pre-Krete for complete hydration of the lining. Concrete Sealer can be spray, brush, and/or roller applied to the fresh mortar lining. It should be applied when the surface moisture has disappeared. Coverage is approximately 150-200 sq. Ft. / Gal. Mortar lining should be allowed to set untouched for 24 hours.

NOTE: CONCRETE SEALER IS NOT BE USED IN POTABLE WATER SERVICE

Products

  • Overview
  • Pre-Krete Formula C-17
  • Pre-Krete Formula G-8
  • Pre-Krete Tankliner-61 (T-61)
  • Pre-Krete Formula FS-16
  • Concrete Sealer
  • Em-Cryl 600

Call for Free Test Samples

Test blocks and sample chips are available upon request.
Call Dave McKissock at
724-799-7685 or contact us online for more information.

Pocono Fabricators
160 Gamma Drive
Pittsburgh, PA 15238
[email protected]

Products

  • Overview
  • Pre-Krete Formula C-17
  • Pre-Krete Formula G-8
  • Pre-Krete Tankliner-61 (T-61)
  • Pre-Krete Formula FS-16
  • Concrete Sealer
  • Em-Cryl 600

Markets Served

  • Power Generation
  • Pulp & Paper
  • Abrasion Service
  • Refineries
  • Potable Water
  • Mining, Geo Thermal, Pipe Lining
  • Fire Training Facilities

Information Center

  • Technical Data Sheets
  • Safety Data Sheets
  • Application Guides/Specifications
  • Design Parameters
  • • Compressive Strength
  • • Flexural Strength
  • • Maximum Service Temperature
  • • Pre-Krete Curing Methods
  • • Coefficient of Thermal Expansion
  • • Tensile Strength
  • • Corrosion Resistance
  • • Thermal Stress Index
  • • Thermocycling/Thermal Shock
  • • K-Factor or Thermal Conductivity
  • • Density
  • • Pure Aggregate
  • • Abrasion Resistance
  • • Absorption Factor – Barrier Linings
  • • Cracking and Self-Healing Properties

Pocono Fabricators
160 Gamma Dr.,
Pittsburgh, PA  15238
Tel:  724-799-7685
[email protected]

© Pocono Fabricators 2017. All rights reserved.